Hardeman Motorsport B.V. — Zandweg 20a, Kruiningen (NL) +31 (0)113 700266 info@hardemanmotorsport.nl

BMW F8x M2, M3 & M4 Differential & LSD Upgrades

The F8x-series BMW M models are renowned for their speed potential: turbocharged engines capable of delivering substantial power and lightweight components packaged in a car that is not particularly light overall due to numerous comfort features and a relatively large chassis. This puts considerable strain on the drivetrain. Over the years, we have gained extensive experience addressing worn bearings, underperforming or broken limited-slip differentials, and driveline vibrations on this platform.

BMW F8* M2, M3 and M4 — Hardeman Motorsport
M2 CS — perhaps the most enjoyable car BMW will ever build?

Limited-Slip Differential / Active M Differential

The BMW E-diff (BMW Active M Differential) is a clutch-type LSD actuated by an electric motor that regulates locking action based on vehicle speed, steering angle, and wheel slip (in effect, clamping the clutch pack inside the differential with more or less force). Paying close attention behind the wheel reveals that this system always reacts slightly later and less crisply than a purely mechanical clutch-type LSD, lacking the ultimate response and predictability required for dedicated motorsport and drift applications. For that reason, BMW Motorsport itself fits a mechanical Drexler clutch-type LSD in its factory race cars.

BMW F8* M2, M3 and M4 — 84 2012 BMW M5 final drive
Cutaway display unit of an M4 GKN E-LSD / electronically controlled limited-slip differential

Another drawback of this factory LSD unit is that the carrier is welded shut from the factory, making it non-serviceable in standard form. We offer several engineering solutions for this:
– Conversion using a CNC-machined chromoly cover to turn the factory unit into a fully serviceable LSD. This modification also resolves excessive play on the short output flange. (New clutch plates / friction discs can subsequently be fitted over time without any cutting or welding.)

BMW F8* M2, M3 and M4 — Cover v1
Hardeman Motorsport E-LSD billet cover


– Installation of an OS Giken Super Lock clutch-type LSD. (Stronger construction, superior locking performance, and greater durability, eliminating the need for regular clutch rebuilds. The electronic rear axle control unit / GHAS module must be coded out; we handle this coding in-house so the car leaves the workshop completely fault-free.)

BMW F8* M2, M3 and M4 — Hardeman Motorsport (4)
OS Giken Super Lock for BMW F-series M2, M3, M4


– Installation of a Drexler clutch-type LSD (Stronger construction, superior motorsport performance; requires Drexler output flanges / stub axles for installation, and the electric actuator motor must be coded out.)

Proof that the standard differential permits excessive internal slip during hard driving can be seen in this M2 unit: the rotational speed differential between the side gear (sun gear) and the carrier housing became so severe that the steel thrust washer positioned between them melted and disintegrated. Converting the factory carrier into a serviceable LSD is the most cost-effective repair in this scenario, as the only alternatives are purchasing a complete new OEM final drive unit or upgrading to an aftermarket clutch-type LSD.

BMW F8* M2, M3 and M4 — Hardeman Motorsport (5)
Melted thrust washer removed from a standard M2 limited-slip differential

M2 CS Racing and M4 GT4 Race LSD Rebuild

We stock all required internal components to rebuild the differential of your Cup or GT4 race car. These factory race cars were delivered directly from BMW Motorsport with a Drexler clutch-type LSD. Due to their heavily loaded bearings, these units require more frequent oil changes, and the clutch packs periodically benefit from a fresh rebuild to restore crisp locking performance and maximum traction.

BMW F8* M2, M3 and M4 — Hardeman Motorsport (6)
Pricing for rebuilding the M2 CS Racing or M4 GT4 differential can be found in our webshop: https://www.motorsportparts.nl/bmw/bmw-f87-m2/aandrijving-en-diff/sperdifferentieel-revisie-bmw-m2-cs-racing-cup-en-m4-gt4-drexler
BMW F8* M2, M3 and M4 — BMW M4 track build

Differential Rebuild

Alongside LSD upgrades and clutch-pack servicing, we also carry out complete differential rebuilds. This includes replacing all bearings and oil seals, thoroughly cleaning the housing internals (these clutch-type differentials generate a considerable amount of friction debris), derusting the casing, and setting bearing preload and backlash to exact factory specifications. Drive-in removal, installation, and fresh differential oil service on the vehicle are also available.

BMW F8* M2, M3 and M4 — Hardeman Motorsport (8)

Custom Final Drive Ratio — Crown Wheel & Pinion

Final drive ratio changes are available for the F8x M2, M3, and M4. For a customer campaigning an M2 CS Racing, we conducted in-depth gearing analyses to determine the optimal final drive ratio. Every F8x M model—including the factory M2 CS Racing—leaves the factory with a 3.46 final drive ratio (DCT). On circuit, however, this stock gearing means the car predominantly uses only 2nd through 4th gear, even though 7 gears are available in the transmission.

BMW F8* M2, M3 and M4 — Hardeman Motorsport (9)
Standard optimal shift points for the F8x

Calculations based on the S55 powerband and straight-line terminal speeds across circuits demonstrate that a shorter (numerically higher) final drive ratio brings 5th and 6th gear effectively into play while multiplying wheel torque in every gear for stronger acceleration. Across multiple circuit simulations, a 4.10 final drive ratio proved to be the ideal balance between maximum acceleration and avoiding excessive gearshifts.

BMW F8* M2, M3 and M4 — Hardeman Motorsport (10)
Optimal shift points with a 4.10 final drive ratio on the F8x
BMW F8* M2, M3 and M4 — Hardeman Motorsport (11)

Differential Mounting — Diff Lift Kit

We can also mount the differential more rigidly in the rear subframe using polyurethane and solid aluminium bushings to prevent excessive differential wind-up and deflection under load.

BMW F8* M2, M3 and M4 — Hardeman Motorsport (12)
Subframe differential mounting with polyurethane and aluminium bushings.


We also supply and install the Team Schirmer Diff Lift Kit, which is strongly recommended for lowered track cars to prevent the differential cooling fins from striking the tarmac/kerbs and to restore optimal driveshaft geometry for maximum power transfer. This lift kit includes a bracket that utilises an additional mounting point on the rear subframe, securing the differential much more firmly.

BMW F8* M2, M3 and M4 — SRE rear axle differential lift kit
Team Schirmer diff lift kit

Road Variant:

We can install the diff lift kit using 4 polyurethane bushings. For cars driven predominantly on public roads, this setup is preferable because gear whine transmitted from the differential remains limited to a subtle background note at specific speeds.

BMW F8* M2, M3 and M4 — Hardeman Motorsport (14)

For primarily road-focused cars, we keep the Turner Motorsport or Powerflex dual differential mount kits in stock. These support the differential more securely within the subframe, substantially reducing the risk of tearing the factory rubber differential bushings.

BMW F8* M2, M3 and M4 — Hardeman Motorsport (15)
Turner M2, M3 and M4 billet aluminium dual-mount differential bracket and genuine BMW updated polyurethane differential mounting bushings

Contact us for technical details, pricing, and workshop scheduling.

DCT Dual-Clutch Transmission / Gearbox:

For the F8x dual-clutch transmission (M-DCT), we offer a cast aluminium oil pan with increased fluid capacity for improved thermal management, making it far better suited to trackdays, high-speed Autobahn driving, drifting, and other motorsport applications. We recommend pairing this upgrade with Motul’s dedicated High Torque DCT fluid for smooth, consistent shifting performance under high thermal and torque loads.

BMW F8* M2, M3 and M4 — Hardeman Motorsport (16)

More

We also have extensive experience with brake upgrades, coilover suspension setups, full adjustable uniball control arm kits, and diagnosing complex driveline issues. Contact us for further details.

BMW F8* M2, M3 and M4 — Hardeman Motorsport (17)

Need advice or a quote for your differential or chassis?

Send us your VIN and intended use for a tailored workshop quote, or order parts directly at Motorsportparts.nl.