Hardeman Motorsport B.V. — Zandweg 20a, Kruiningen (NL) +31 (0)113 700266 info@hardemanmotorsport.nl

BMW F20–F23 & F30–F36 (1, 2, 3 & 4 Series / M135i / M140i) Differential & LSD

The F-series BMW 1, 2, 3 and 4 Series models are fundamentally the same cars underneath. This means they share a great deal of chassis and drivetrain engineering, including the same engines, gearboxes, differentials, subframes, control arms, and so on. On this page, we cover the upgrades that we consider genuinely worthwhile on these cars.

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Keijzer 04

Limited-slip differential:

BMW M135i, M140i, M235i, M240i, 335i/d, 340i/d, 435i/d and 440i/d Limited-Slip Differential (LSD) OS Giken

The M135i/M235i produces 320 hp and 450 Nm, and the M140i/M240i delivers 340 hp and 500 Nm. Serious figures for very fast cars. Unfortunately, BMW chose to keep an artificial performance gap between these models and the M2 and M3, primarily by leaving out a limited-slip differential. As a result, power escapes to whichever rear wheel has the least grip. Put one wheel on snow and apply throttle, and the wheel on the snow will simply spin. The same happens during spirited driving and cornering: steering inputs and weight transfer unload the inside rear wheel, causing that wheel to spin repeatedly under power.

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Raymond02
M140i limited-slip differential

4-cylinder models (116i up to 428i and 118d–420d)

On these models—such as the 125i, 330d, and 420i—BMW fitted a smaller-casing differential than on the 6-cylinder turbos. That is not a problem, as these engines also hold plenty of performance potential and we supply limited-slip differentials to suit them. We offer several types of limited-slip differentials for these models:
Torsen / helical LSD: Quaife, Precision Gearing, Wavetrac
Clutch-type LSD: OS Giken, Drexler, Gripper

xDrive models:

Cars equipped with xDrive naturally have higher traction because as soon as the rear wheels lose grip, the transfer case electronically routes power to the road via the front axle. This obviously reduces the load on the rear axle. For that reason, BMW chose to equip models such as the M135i xDrive or 440i xDrive with the smaller rear differential. Unfortunately, these units are weaker than the virtually indestructible differentials found in the rear-wheel-drive models. On a standard car this is not an issue, but once power is increased it can certainly cause problems—because the transfer case is torque-limited and cannot send any additional power to the front axle.

xDelete

In addition, apps such as xDelete are available to disable the transfer case completely. Doing so subjects the small rear differential to the full engine output, significantly increasing the risk of differential failure.

xDrive pack

To address this, we offer an xDrive upgrade package in which we can convert the following components:
– Rear driveshafts from the rear-wheel-drive models
– Modified propshaft to match the rear-wheel-drive differential
– Differential with limited-slip unit (either an LSD fitted inside the standard xDrive differential, or a complete rear-wheel-drive differential with LSD)

This results in an extraordinarily strong drivetrain that reduces strain on the transfer case, puts more power down onto the tarmac, behaves far more predictably at and beyond the limit of grip, and handles xDelete without issue.

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Tcd2
OS Giken Super Lock LSD

Why choose an OS Giken limited-slip differential?

An OS Giken limited-slip differential for your BMW M135i/M140i ensures that power is delivered to both rear wheels. Instead of spinning a single unloaded wheel, the car accelerates harder because the wheel with the highest vertical load and grip is also driven. In practice, the difference between two identical cars—one equipped with an OS Giken LSD and the other without—is substantial. Following each other along twisty roads, the car with the LSD carries more speed through corners and pulls away cleanly on corner exit from the car without an LSD. From a standing launch, too, the LSD-equipped car hooks up with far better traction and accelerates harder. Because an LSD makes the car insensitive to varying grip levels between the left and right rear wheels, driving with an LSD is much more predictable.

But I don’t need to drift every corner

That is not the point of fitting one. An OS Giken limited-slip differential for your BMW M135i/M140i actually generates significantly more mechanical grip, making the rear end less prone to stepping out unexpectedly. In circuit racing, drifting is never the goal, yet a limited-slip differential provides a huge advantage, making the car much faster and easier to control. So why do drifters want an LSD? Because there is more grip with an LSD—and when you deliberately apply excess throttle to break traction and initiate a drift, the car is far easier to control. In short: higher grip first, and much better control when intentionally pushing past that limit.

Additional cooling available

With a steel casing, roughly 1.3 litres of oil capacity, and an aluminium rear cover, this differential is similar to virtually every non-M BMW differential where overheating is normally not a concern. Fitting a limited-slip differential does increase operating temperatures noticeably, though for road use that still poses no problem. On cars driven actively on circuit, however, we regularly see cases where excessive oil temperatures cause the shaft seals to wear prematurely and start leaking.

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — ThermalCamera2021 08 11 16 51 340200 rotated
Thermal camera imaging clearly shows heat being transferred from the differential casing into the cooling heatsink

Fitting a cooling element to the rear cover keeps the cover temperature considerably lower, which cools the entire differential because a differential relies on splash lubrication. As the crown wheel rotates through the oil bath, it scoops up oil and flings it around inside the casing. Roughly half of that oil hits the aluminium rear cover, while the other half flows across the input pinion and output shaft bearings. Keeping the oil cooler prevents premature thermal breakdown of the oil and its additives (such as silicone LSD friction modifiers, which have a lower breakdown temperature than the base oil). This maintains proper lubrication and keeps the LSD operating smoothly.

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Hardeman Motorsport (5)
The Hardeman Motorsport cooling fin adapter for increased airflow cooling.

Fitting a drain plug

From the factory, BMW did not equip these cars with a differential drain plug, meaning the oil cannot simply be drained out without removing the unit. During a rebuild or LSD installation, we can machine and fit a drain plug, making future oil changes considerably easier. A fill plug is already present from the factory.

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Hardeman Motorsport (6)

Customer feedback

What drivers almost universally mention is that the car suddenly has far more grip and feels much better planted as a result. Oversteer is also much easier to control, eliminating the unpredictable pendulum snap typical of an open (non-locking) differential. A frequent question we receive is whether any issues arise with the car’s electronics. The answer is no: the car does not ‘see’ that a mechanical limited-slip differential is fitted and simply detects less rear wheelspin. It causes no issues whatsoever with traction control or DSC/ESP.

Even if the car is leased, you will receive no complaints from the leasing company because nothing is visible from the outside. Another common question is whether there are drawbacks during relaxed everyday driving, such as chatter or clunking noises. During the running-in period over the first few hundred kilometres, the limited-slip differential can occasionally feel slightly tight in slow turns. This disappears on its own once bedded in, after which everyday driving feels no different from a car without an LSD. Furthermore, we offer a buy-back scheme in which a tight open differential is refitted underneath your car.

Interested in an OS Giken limited-slip differential for your BMW M135i, M140i, M235i, or M240i? Request a quote now Or
Browse our limited-slip differentials in the webshop

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — BMW M135i drift

Customer with a 440 hp M140i:

Yesterday and today I finally managed to give the car a proper drive.
This is quite simply the single best upgrade on the entire car. 
Way more grip, you can feel very clearly when the car starts to step out, and it is easy to catch and control.
The car also feels much more planted on the road thanks to the LSD and the V-brace.  
Every drive is pure enjoyment now—how it really should have been from the factory. 
A real shame for the people who don’t know what they’re missing! 


Great work you guys do, and thanks again to the whole team! 


Kind regards from Belgium,


Brecht 
BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Hardeman Motorsport (8)

Isn’t BMW’s M Performance diff better?

We can also supply and install BMW’s own M Performance limited-slip differential on request. We welcome any mechanical LSD over an open diff, so we are glad BMW offers it, but an OS Giken exchange differential built by us offers the following advantages over that unit:

  • The M Performance LSD uses a relatively mild 30% locking setup; while we offer upgrades for it, in standard trim it comes nowhere near the performance of an OS Giken LSD, which locks much more positively—translating directly into higher grip, less chance of spinning an inside wheel, greater stability, better control, and clearer feedback from your rear axle.
  • An OS Giken unit is more durable in terms of maintenance: over time an M Performance LSD will require a rebuild (which we can also carry out), whereas an OS Giken requires no soft friction coating on its clutch plates that wears away over time, allowing it to outlast the car itself.
  • Every clutch-type LSD sheds a small amount of microscopic steel wear particles over time, which enters the oil and circulates through the differential. The differentials we build are fitted with stronger bearings than the delicate OEM bearings BMW uses. We provide a 2-year warranty on our rebuilds, and the upgraded bearings last substantially longer.
  • We offer the option to have a drain plug installed, which the M Performance differential lacks—meaning old oil always has to be suctioned out during oil changes. Those oil changes are vital (see the point above), and suctioning the oil never removes all the settled debris properly.
  • We also equip the differential with an internal magnet to filter metallic debris out of the oil.
  • We also offer the option of installing just the LSD core into your existing differential—with or without a drain plug—rather than replacing the complete unit, which works out more cost-effective than buying an M Performance differential.

Maintenance and other upgrades

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Hardeman Motorsport (9)

Suspension and dampers

We have extensive experience installing new Bilstein dampers and coilover suspension kits. On these cars, Bilstein dampers are practically the minimum the chassis requires: even from new, the OEM dampers struggle to control road undulations once the pace increases. A set of Bilstein B6 dampers already delivers noticeably better body control while preserving ride comfort. Especially now that many factory dampers have covered well over 100,000 km, their damping force has faded considerably.

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Hardeman Motorsport (10)

A Bilstein B12 kit provides matched lowering springs and uprated dampers in one package at a competitive price. It is a well-balanced setup that works superbly on the road, provides markedly better body control, and lets the chassis perform properly.

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Hardeman Motorsport (11)
Bilstein B12 on an M140i. Ride height settles slightly further after installation; pictured is the driver’s side, which sits slightly higher unladen so the car’s weight balance levels out once the driver is seated.

Coilover suspension kits are also available; we can supply virtually every major brand, including Bilstein, Eibach, GAZ, H&R, Intrax, JRZ, KW, Nitron, Öhlins, Sachs, Tein, and more. Following installation, we align the geometry to match your specification and intended use.

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — 440i ohlins
Never let anyone talk you into a KW kit when Öhlins isn’t hundreds of euros more expensive. Otherwise, there are undoubtedly better-value alternatives available.

Rear axle V-brace tension struts

The story behind the V-brace is somewhat peculiar. From the factory, this brace was fitted exclusively to the 3-door F21 and LCI M135i & M140i—not to the 5-door. On LCI-2 models (from late 2017 – early 2018 onwards), it was omitted altogether. Nobody knows the exact official reason. The most plausible and widely cited explanation is that the 3-door bodyshell had slightly lower torsional rigidity than the 5-door, and the brace ensured both body styles felt equally stiff. For LCI-2, BMW largely adopted the suspension setup from the 2 Series and reportedly reinforced several points on the bodyshell for added rigidity, making the brace unnecessary. That remains speculation, however—nobody knows for sure. Either way, the genuine BMW parts remain readily available and bolt straight onto all F2x models. The silver-coloured parts in the photo have been newly fitted.

The two tension struts tie the rear subframe directly to the underbody of the car. Attached to the subframe are the suspension arms, the springs (at their lower mounts), and the differential plus driveshafts. Rather than being bolted solidly to the bodyshell, the subframe is mounted in rubber bushings. While this isolates noise and vibration for comfort, it also allows the subframe to deflect underneath the car under load. The V-brace reduces rear-axle movement—specifically limiting horizontal yaw rotation of the subframe, which otherwise causes unwanted passive rear-axle steer.

That sounds logical in theory, so how much difference do you actually feel? Quite a lot. The improvement is subtle yet clearly noticeable—even during normal, relaxed driving, which was unexpected. The rear end of the car feels stiffer and more stable. Turn-in is also more direct because less steering input is lost to flex in the chassis mounts, and for the same reason you get clearer feedback from what the rear tyres are doing. During spirited driving, the improvement stands out clearly when trail-braking into a corner and getting back on the throttle: sharper response, higher stability, better feedback, and consequently greater confidence. Highly recommended!

Any downsides? One minor point: slightly more road noise from the tyres is transmitted through the tension struts into the bodyshell. It is minimal, however, and the dynamic benefits easily outweigh it. You also bolt an extra 2.5 kg of steel underneath the car—which can easily be offset by removing one of the heavy factory vibration dampers. The parts cost €165 in total and take roughly half an hour to install.

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — 440i ohlins os giken

Front lower control arms (M4 LCA upgrade kit)

A common sight on the cars passing through our workshop is that owners drive them harder through corners than BMW originally calibrated the geometry for. What we see is accelerated wear on the outer shoulder of the front tyres compared to the rest of the tread. That indicates the front axle needs additional negative camber to distribute wear evenly across the tyre contact patch. Fortunately, BMW designed the M4 (F80/F82) with keen drivers in mind, equipping it with lower control arms that extend slightly further outwards at the bottom. Fitted to the standard 1, 2, 3, and 4 Series, they deliver the exact same effect: increased negative camber (roughly 2 degrees instead of 1.25 degrees) and slightly more caster. In addition, these arms are stiffer and feature firmer rubber and a sealed spherical bearing. That gives the front axle higher cornering grip, clearer feedback through the steering wheel, stronger steering self-centring, and a much cleaner tyre wear pattern.

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Hardeman Motorsport (14)
Tread wear pattern we frequently see on enthusiastically driven F20–F36 models—especially on Michelin Pilot Super Sport tyres, which use a softer compound on the outer shoulder. This setup needs more negative camber.


Complete with a set of shims, locknut, and a dedicated bolt for the headlight level sensor bracket, we have assembled the bolt-on kit below ready to install straight underneath your 1, 2, 3, or 4 Series. Make sure to have the wheel alignment checked afterwards.

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Hardeman Motorsport (15)
M2/M3/M4 control arm conversion kit for the standard 1, 2, 3 and 4 Series. Fits all models including 316i, M135i, M240i, etc.

xDrive

The F8x LCA upgrade does not fit xDrive models, as the wider geometry would produce excessive camber and place undue stress on the front driveshafts. For xDrive cars, we offer an alternative solution with our uniball control arm conversion: https://www.motorsportparts.nl/bmw/bmw-f20-f23-f87/subframe-en-draagarmen/uniball-dwars-draagarmen-bmw-f20-f36-x-drive-alle-x-drive-modellen

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Hardeman Motorsport (16)

Anti-roll bars

We supply and install anti-roll bar kits from H&R, Eibach, and Hardrace, either from stock or with short delivery times. Our favourite kit is the H&R set, which delivers a great chassis balance (less understeer) and gives the car the crisp turn-in response a proper hot hatch deserves. Guiding the car at pace through quick right-left-right transitions (such as roundabouts or chicanes) feels much more natural and composed because the body no longer keeps leaning right when you are already steering back to the left. Note that the rear anti-roll bar is routed above the rear subframe; installing it requires lowering the subframe (along with disconnecting the exhaust, differential, brake hoses, and optional V-brace), making it ideal to combine with replacing the differential or subframe bushings.

Subframe and control arm bushings

We stock subframe and control arm bushings for every position on these cars in OEM rubber, polyurethane, or solid aluminium / uniball spherical bearings, and provide full workshop installation for all of them. The soft factory rear subframe bushings in particular are far from ideal for high-torque cars: under hard acceleration, differential torque reaction causes the subframe to twist inside its rubber mounts towards the driver’s side. When the subframe shifts, every control arm pickup point moves with it, dynamically altering both camber and toe. That compromises tyre-to-road contact and introduces unwanted rear-axle steer. Firmer polyurethane bushings restrict this movement, while solid aluminium subframe bushings eliminate deflection completely and tie the subframe solidly into the chassis, adding to overall body rigidity.

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Hardeman Motorsport (17)

Brakes

We stock high-quality brake pads, braided stainless steel brake lines, and brake discs proven with excellent results among our track and racing customers. BMW’s M Performance big brake kit is also available as a great upgrade:

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Hardeman Motorsport (18)
M Performance big brake kit with 370 mm front brake discs on an M140i

For circuit and trackday use, uprated brake pads are essential, and to prevent overheating of surrounding components, active brake cooling is a worthwhile addition alongside GiroDisc’s titanium brake pad heat shield shims.

Taken as a whole, the braking system is already remarkably robust—especially by BMW standards. Only the standard brake discs—while perfectly fine for road use—can be prone to vibration and judder on high-horsepower cars driven hard in hot ambient conditions. To upgrade the front brake discs, we offer two options:

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — 3jzo95ku
  • Caliper mounting spacers to fit larger M4 380×30 mm brake discs.
    • These discs feature improved internal cooling ventilation and are also available as 2-piece units from GiroDisc
BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Hardeman Motorsport (20)
GiroDisc lightweight, actively ventilated, race-proven 2-piece brake discs.

Short shifter

Short shifters from IRP and Coolerworx fit these cars. We do not immediately recommend them for a daily commuter because the solid mechanical linkage transmits noticeably more gearbox and engine noise into the cabin. For spirited and track driving, however, they offer clear advantages: a crisp, positive shift gate, a mechanical reverse lockout, and a much lower risk of a money shift.

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Hardeman Motorsport (21)

Transfer case rebuild

BMW engineered the xDrive models of the 1, 2, 3, and 4 Series with a well-balanced all-wheel-drive system. Under normal driving, the car operates primarily as rear-wheel drive for optimal handling feel; when the ABS/ESP system detects that the rear axle is losing grip, an electric actuator motor engages the multi-plate clutch pack inside the transfer case. Compressing this clutch pack allows drive torque to be sent to the front wheels.

Common reasons we see for rebuilding the transfer case include:

  1. Worn clutch pack / little or no drive sent to the front axle
  2. Clunking, vibration, or hesitation caused by a stretched drive chain or burnt clutch plates
  3. Bearing whine or rumble due to worn bearings
  4. Oil leaks from shaft seals or O-rings
  5. Loss of drive to the rear axle caused by a sheared or stripped output flange / mainshaft spline.

Issues 1–4 are resolved with a transfer case rebuild.
Issue 5 can be addressed at the same time; we carry replacement parts in stock, including uprated reinforced components that prevent the problem from recurring in the future.

BMW F20-F23 and F30-F36 1, 2, 3 and 4 Series — Bmw atc35l xdrive transfer case clutch plates
Transfer case clutch pack

Need advice or a quote for your differential or chassis?

Send us your VIN and intended use for a tailored workshop quote, or order parts directly at Motorsportparts.nl.