Since the very beginning of Hardeman Motorsport, we have supplied components and services for the BMW E36. Over the years, we have built up an extensive product range for the various E36 and Z3 models, and we would like to highlight the specialist parts and services below. For the majority of our product range, please visit our webshop: https://www.motorsportparts.nl/bmw/bmw-e36-z3/

Limited-slip differential (LSD) and differential
Several types of differentials in different casing configurations were factory-fitted to the E36 and Z3, which we break down below:
- 168 small-case differential with 2 rear cover mounting points – E36 Saloon, Coupé, Touring and Convertible with 4-cylinder engines.
- 168 small-case differential with 1 rear cover mounting point – E36 Compact and Z3 with 4-cylinder engines.
- 188 medium-case differential with 2 rear cover mounting points – E36 Saloon, Coupé, Touring, Convertible and M3 3.0 with 6-cylinder engines.
- 188 medium-case differential with 1 rear cover mounting point – E36 Compact, Z3 with 6-cylinder engines and Z3M.
- 210 mm large-case differential with 2 rear cover mounting points – E36 M3 3.2
We recommend the 168 casing—particularly when fitted with the OEM ZF clutch-type LSD—for no more than 150 hp; beyond that output, there is a significant risk of internal component failure. Depending on the final drive ratio, the 188 differential can reliably handle up to around 350 hp, while the 210 mm differential is exceptionally strong and limited far more by external operating conditions than by engine power.

We have a limited-slip differential available for every model:
168:
* Factory-optional with a ZF clutch-type LSD, which we can rebuild or upgrade.
* Aftermarket: OS Giken Superlock, Gripper, Drexler, PG, MFactory, Quaife Torsen.
188:
* Factory-optional with a ZF clutch-type LSD (standard on M3 3.0 and Z3 M), which we can rebuild or upgrade.
* Factory-fitted with a Torsen helical LSD on the Z3 2.8 and 3.0 (including Coupé). Over high mileage, these units develop play at the output flanges; we offer a dedicated Torsen LSD rebuild to resolve this.
* Aftermarket: OS Giken Superlock, Gripper, Drexler, PG, MFactory, Quaife Torsen.
210:
* Factory-fitted with a ZF clutch-type LSD on the M3 3.2. We can rebuild and upgrade these units.
* Aftermarket: OS Giken Superlock, Gripper, Drexler, MFactory, Quaife Torsen.
Custom final drive ratios are also available for every model—please get in touch for tailored technical advice. We carry a large stock of OEM crown wheel & pinion gear sets in 2.93, 3.15, 3.23, 3.45, 3.64, 3.73, 3.91, 4.1, 4.45 and numerically higher ratios.

Subframe mounting reinforcement / repairing chassis cracks:
The BMW E36 Saloon, Convertible and Touring (not the Z3 or Compact) are notorious for developing cracks in the chassis floor around the rear subframe mounting points. BMW officially released a factory repair solution consisting of 4 weld-in reinforcement plates that strengthen the subframe mounting points. While carrying out this work, we can simultaneously weld in anti-roll bar and control arm mounting reinforcements.

With our reinforcement kit installed, the chassis floor becomes rigid enough that cracking will no longer occur, even under heavy track use or drifting. In addition, we stitch-weld the factory pinch seams, as the E46 also shows a tendency to tear along these seams.


When installing the reinforcement kit, we also replace the brake lines routed above the fuel tank—as these are prone to corrosion—and we can replace all subframe, differential and control arm bushings with OEM rubber, polyurethane or spherical bearings (uniballs).
We also offer the option of having a rear subframe pre-assembled by us on an exchange basis. You purchase a powder-coated subframe already pressed with polyurethane, OEM rubber or solid aluminium bushings. You then simply bolt the unit in and return your old subframe core afterwards, or have us fit it directly while servicing your differential or reinforcing your chassis floor mounts.

Rear trailing arm bushings (RTAB):
From the factory, the rear trailing arm bushings on the E36 are made of rubber. Even when new, these rubber bushings are relatively compliant, and over time they soften further and can even tear. Particularly during track use or when running modern high-grip tyres, these bushings deflect laterally instead of merely pivoting on their intended axis.

When this bushing deflects laterally under load, it dynamically alters rear camber and toe, causing unwanted passive rear-axle steering. This creates a vague, unsettled feeling from the rear end and is detrimental to chassis feedback, tyre wear and mechanical grip during spirited or track driving. We therefore strongly recommend replacing this bushing with a spherical bearing (uniball). A spherical bearing eliminates lateral play completely while allowing bind-free articulation solely along the intended suspension arc, restoring precise rear-axle control and supple suspension movement.

Propshaft rebuild:
The propshaft on an E36 or Z3 is getting on in years by now and frequently exhibits play or worn bearings. Once the needle bearings inside the universal joints begin to wear and bind at specific operating angles, they induce driveline vibrations through the car—typically felt first under hard acceleration in the lower gears.
We offer a complete propshaft rebuild service (new universal joint bearings, centre support bearing, structural inspection, repair, painting and dynamic balancing) starting from €495.
