OS Giken Super Lock 3D Tuning & Negative Preload Simulator

Parallel flat cross-pin ramps (Decel/Accel), 16 negative preload springs (18/28/38 kg) & 5-14 friction plates

CURRENT CLAMP / LOCKING TORQUE
90 Nm
At rest (flat Belleville preload spring)
Negative Preload Springs
224 kg
8 / 16 springs active
Max Potential (Decel / Accel)
735 / 1295 Nm
25/45 • 12 friction plates
1. Pressure Ring Angles & Friction Plates 6,300+ setups
A. Pressure Ring & Parallel Cross-Pin (Decel / Accel) 25/45 (1.5-Way)

OS Giken measures cam angles inversely: higher number = more aggressive locking. The cross-pin ends have identical angles so 2 parallel flat faces slide flush, and asymmetric rings can be flipped.

B. Friction Plates (5 to 14, flat Belleville spring) 12 plates (90 Nm base)
5 plates (compact) 10 plates 14 plates (full Super Lock)
2. Negative Preload Springs (4 Corners × 4 Slots)
4×4 224kg
Each slot = symmetric set of 4 springs:
Pos. 1 (4x)
Pos. 2 (4x)
Pos. 3 (4x)
Pos. 4 (4x)
18 kg (Light) 28 kg (Medium) 38 kg (Heavy)

Because the Belleville preload spring sits flat when assembled, initial cam climb puts pressure on the clutch pack immediately (first spring travel is lightest). As the cross-pin climbs further, coil-spring counter-pressure rises exponentially.

Progressive Lock Curve (Immediate Bite + Exp. Springs) Exp. spring force: 112 kg
-100% Decel 0% Flat Preload +100% Accel
3. Cam Load & Torque Wrench Test Ready
Torque Load on Cross-Pin (Decel / Accel) 0% (Unloaded)
Exploded View (matching OS Giken cutaway) 0%
Torque Wrench (Nm) 90 Nm
TORQUE (Nm)
Wrench: 0 Nm
Clamp: 90 Nm
Axle Stub — Test Cam & Springs Drag up (Accel) or down (Decel) to watch the pressure-ring spring seats compress the coil springs.
LEFT AXLE: LOCKED
WRENCH: 0 Nm

OS Giken Super Lock — Parallel Flat Ramps & 16 Negative Preload Springs

Select a Decel/Accel pressure ring profile (or flip it), adjust 5–14 black friction plates, and configure up to 16 negative preload springs (4 per corner). Click Close-up Springs & Parallel Ramps to watch the pressure ring’s inner seats compress the springs progressively.

3D Controls: Left-drag = Orbit | Scroll = Zoom | Drag axle stub = Load cross-pin