The G-chassis 3 Series platform is clearly an evolution (in terms of suspension and drivetrain engineering) of the previous-generation F-chassis cars, although BMW has addressed several of the major performance shortcomings. M*40i (B58) models come as standard—even with xDrive—with an electronically controlled limited-slip differential (e-LSD). The standard dampers are also a significant step forward. Naturally, we still have a number of observations and improvements to highlight, as you can read below.

Differential
As standard, the road cars are equipped with 4 different differential models:
168LW Steel rear differential

A differential familiar from the previous generation. Fitted exclusively to pre-facelift / non-LCI models.
We can rebuild this unit and fit various limited-slip differential models from Gripper, Quaife, OS Giken, Drexler, PG Torsen and more.
190AL Aluminium rear differential

These differentials were fitted to all models without a factory LSD, such as the 320i, 330e, Z4 20i, 220i, etc. These differentials are relatively lightweight and not particularly robust.
It is possible to equip these differentials with a limited-slip differential; Drexler, among others, offers a suitable unit.
For issues involving failure of these differentials or driveshafts, we offer dedicated reinforcement solutions: https://hardemanmotorsport.nl/bmw-3-serieg20-g26-g29-z4-en-g42-2-serie/#Differentieel_verstevigen

215LW Steel rear differential
The 215LW differential is a very strong unit fitted as standard to the high-torque diesel models.
This is an open differential unit for which we can offer the following upgrades and services:
- Rebuild – New bearings, oil seals, bead-blasting and painting, backed by a 2-year warranty.
- Limited-slip differential – Available with Quaife, Drexler, Wavetrac or OS Giken Super Lock LSD.
215LWS Steel rear differential with electronically controlled LSD

The 215LWS differential is a very strong unit fitted as standard to all Mx40i models across the 2, 3 and 4 Series as well as the Z4 M40i.
As standard, this housing contains a limited-slip unit actuated by an electric motor. While an e-LSD is far better than an open differential, it does not match the feel and response of a mechanical clutch-type LSD; furthermore, if the factory unit wears out or suffers a fault, BMW only supplies a complete replacement differential assembly. For that reason, as well as the advantages listed below, we offer a mechanical clutch-type LSD conversion for this differential:
- Superior driving dynamics: continuously variable locking (instead of 6 discrete stages) and directly modulated via the throttle pedal, stronger locking action, higher traction and greater predictability.
- Higher durability: using uncoated clutch plates / friction discs eliminates coating wear and extends service intervals.
- Fully rebuildable with individual spare parts available.
170AL Aluminium front-axle differential
The front-axle differential fitted to xDrive models. We can rebuild and reinforce this unit.
BMW i4
The all-electric i4 integrates the final drive ratio and the differential within a single electric motor housing, which also contains an open differential as standard. Drexler offers a limited-slip differential for the rear axle, for which we provide both supply and professional installation.
Additional differential cooling available
With a steel casing, approximately 1.3 litres of oil capacity and an aluminium rear cover, this differential closely resembles almost every non-M BMW differential where overheating is normally not an issue on the road. Fitting a limited-slip differential will noticeably increase operating temperatures, though even that does not necessarily cause problems in road use. On cars driven hard on circuit, however, we regularly see premature oil seal wear and oil leaks caused by excessive oil temperatures.

Equipping the rear cover with a finned cooling element keeps the cover temperature substantially lower, which cools the entire differential because the unit relies on splash lubrication. As the crown wheel rotates in an oil bath, it scoops up the oil and throws it around the housing. Roughly half of that oil hits the aluminium cover, while the remaining half flows across the input pinion and output shaft bearings. Keeping the oil cooler prevents premature thermal breakdown of both the base oil and its additives (such as silicone-based LSD friction modifiers, which degrade at a lower temperature than the oil itself). As a result, lubrication remains effective and the limited-slip differential continues to operate smoothly.

For the 215LWS, a genuine Toyota Supra differential cover is available; it shares the exact same mounting points but features enlarged cooling fins.

Differential reinforcement:
Due to the limited strength of the 190AL differential, we have already converted a number of cars to a stronger steel-cased differential. This offers the following advantages:
- Capable of handling engine tuning, higher power outputs and motorsport loads
- Wider choice of limited-slip differential conversions (making the LSD upgrade more cost-effective)
- Stronger driveshafts
- Heavy-duty bearings.
- Finned differential cover available for improved cooling.
Contact us to discuss the options for your car.

Gearbox:
For the ZF 8HP automatic gearbox, we offer a high-capacity cast aluminium oil pan that does not need to be replaced at every oil change and provides superior oil cooling via external fins exposed to underbody airflow.
