Hardeman Motorsport B.V. — Zandweg 20a, Kruiningen (NL) +31 (0)113 700266 info@hardemanmotorsport.nl

Drifting & Differential Setup

Which limited-slip differential do I need for drifting?

For serious drifting, a limited-slip differential must meet 3 requirements.

1. High locking action

An open differential (i.e. with 0% lock) is unsuitable for drifting. This is because primarily the inside wheel will spin when initiating a drift. Due to body roll, this wheel is unloaded or lifted off the tarmac and will therefore spin much more easily than the outside wheel, which is pressed firmly onto the road surface. The end result is a single smoking tyre and a car that refuses to hold a controlled drift angle. You therefore need a limited-slip differential (LSD). Broadly speaking, the following breakdown applies to a BMW ZF clutch-type LSD:

25%: suitable for public road use and light drifts
40%: suitable for public road use and serious drifts
60%: less suitable for public road use, very good drifts
80%: unsuitable for public road use, perfect drifts
100%: unsuitable for public road use, good drifts

2. 2-way locking

This means that the limited-slip differential locks under both acceleration and deceleration (overrun). The advantage is that when you briefly lift off the throttle mid-drift, the car remains cleanly settled in the drift, allowing you to adjust your line. With a 1-way limited-slip differential (such as a Quaife helical LSD), lifting off the throttle causes the differential to immediately behave like an open differential, leaving you with less control.

3. Durability

Beyond high locking action, it is essential that the rest of the differential is engineered to match. High locking action can be achieved cheaply simply by increasing the preload on the clutch plates. Naturally, doing so causes the friction discs to wear out much faster. A properly built clutch-type LSD with higher locking action will therefore incorporate additional clutch plates. Two friction plates are fitted as standard, whereas we can supply configurations with up to six clutch plates. In addition to extra clutch plates, differentials in higher-output vehicles—such as the BMW M3—also require reinforcement of the LSD carrier housing. We can custom-build your differential to withstand very high power outputs, backed by warranty.

What about the OS Giken Superlock?

In terms of price, this unit sits somewhat above the (upgraded) ZF clutch-type LSD units. However, it is a highly capable clutch-type limited-slip differential for drifting. Its greatest advantage is that its clever internal design delivers strong locking action when demanded, yet continues to operate smoothly during calm driving. You can confidently run it in your daily-driven car without unpleasant side effects, while it performs superbly at a drift event.

Furthermore, thanks to its design, virtually no rebuild is required over time. Formula Drift world champion Daigo Saito runs an OS Giken Superlock in his 1,200 hp Lexus SC430.

View all limited-slip differentials in our webshop Or
Request a quote for a limited-slip differential

Drifting — Hardeman Motorsport
Drifting — Hardeman Motorsport (2)

Need advice or a quote for your differential or chassis?

Send us your VIN and intended use for a tailored workshop quote, or order parts directly at Motorsportparts.nl.