Hardeman Motorsport B.V. — Zandweg 20a, Kruiningen (NL) +31 (0)113 700266 info@hardemanmotorsport.nl

Differentials & LSD Upgrades for Electric Vehicles (EV)

In the current climate, converting a car from petrol or diesel to an electric drivetrain has become an increasingly interesting option. This is a particularly interesting technical subject because an electric motor has fundamentally different characteristics from an internal combustion engine (ICE). Aside from the difference in power delivery, an electric motor easily operates at low RPM or comes to a complete standstill, meaning no clutch or torque converter is required to remain stationary and pull away.

028 57 Chevy EV conversion Project X Chevrolet Performance eCrate

A gearbox?

Furthermore, an electric motor is capable of operating at high RPM without the exponentially increasing noise levels and energy consumption associated with an internal combustion engine. When converting from a combustion engine to an electric motor, a gearbox is therefore not strictly necessary, provided the electric motor produces sufficient torque and power.

In addition, a gearbox introduces mechanical drag and parasitic losses that can reduce overall drivetrain efficiency.

The differential in an EV, technical advice on electric vehicles — K 007

Final drive ratio

When no gearbox is used, or when gear ratios are utilised differently due to the wide operating RPM range of an electric motor, there is a high probability that the final drive ratio will need to be modified to make full use of the conversion’s potential. After all, the manufacturer of the original internal combustion drivetrain engineered the gearing around the engine’s (maximum) RPM, power output, and wheel size to achieve the right overall ratio.

For example, if an electric motor reaches a maximum of 10,000 RPM whereas the combustion engine reached a maximum of 5,000 RPM, there will be a substantial difference in the road speed the car would achieve. Selecting the right final drive ratio determines the vehicle’s theoretical top speed as well as where its peak tractive effort and highest efficiency lie. Typically, this ratio is a figure between 2.00 and 6.00. For example, if 10,000 RPM enters the differential, dividing this by 6.00 leaves 1,666.66 RPM at the differential output. In other words, the wheels rotate 6 times slower than the input (propeller) shaft.

The differential in an EV, technical advice on electric vehicles — Hardeman Motorsport (3)
Rebuilt Range Rover differentials fitted with custom crown wheel & pinion sets for an electric drivetrain conversion.

Why use a differential when you can fit one motor per wheel?

Thanks to the wide range of capacities, dimensions, and packaging options offered by electric motors, it is technically possible to drive each wheel with its own dedicated motor. Several manufacturers have already demonstrated this in practice, yet the control electronics required are considerably more complex. As soon as one motor delivers slightly more or less torque than the motor on the opposite side, a yaw or steering effect is induced immediately. Consequently, a control unit must continuously monitor and calculate steering angle and road speed in real time in order to regulate individual wheel speeds accordingly. The control system must therefore operate with extreme consistency to avoid unpleasant, unintended, or potentially dangerous handling characteristics. With a mechanical differential, only a single motor is required per axle, and the differential itself (with or without a limited-slip differential) inherently manages torque distribution—making an EV conversion significantly more straightforward.

For this exact reason, modern production EVs such as the Tesla Model 3 and BMW i4 also use a conventional differential rather than one motor per wheel.

The differential in an EV, technical advice on electric vehicles — Hardeman Motorsport (4)

Practical example

We advised our customer Arne, who is converting a P38 Range Rover to electric drive, on this exact engineering challenge. The diesel engine is making way for battery packs, two series-coupled electric motors, and a reduction gearbox with a 1:1.25 ratio. Had he retained the standard final drive ratios in his differentials, wheel torque would have been relatively low while the theoretical top speed would have worked out at an excessively high 250 km/h.

For a Range Rover, that is a pointless top speed because aerodynamic drag at 250 km/h is immense and the chassis as a whole was never engineered for it. We investigated the available gearing options and arrived at a matched set (front and rear axles, as it is a 4×4) of 1:4.75 final drive crown wheel & pinion gears. This delivers substantially greater torque at the wheels alongside a realistic, usable top speed of 186 km/h. As a result, the vehicle gains significantly stronger tractive effort—an advantage off-road, when towing trailers, and during brisk acceleration.

The differential in an EV, technical advice on electric vehicles — Custom final drive ratio with electric motor

Alongside advice on final drive ratios and costings, we can also support our customers with the following:

  • Strengthening and reinforcing your drivetrain, and identifying potential weak points where upgrades are required
  • Technical advice and solutions for reducing drivetrain noise, vibration, and harshness (NVH)
  • Options and implications of fitting a limited-slip differential (LSD)
  • Advice on selecting the right differential type for your specific drivetrain
  • Supplying custom-manufactured crown wheel & pinion sets or advising on existing ratio options
The differential in an EV, technical advice on electric vehicles — Hardeman Motorsport (6)
Crown wheel & pinion gears manufactured for our specific BMW application

We are happy to assist you with technical advice regarding the various options for your drivetrain. We gladly share our hands-on experience with these components to help move your project forward or resolve a specific technical issue. You can reach us by email, telephone, Facebook, or WhatsApp.

Need advice or a quote for your differential or chassis?

Send us your VIN and intended use for a tailored workshop quote, or order parts directly at Motorsportparts.nl.